Do you know that 9-inch angle grinder has been banned recently?
Yes, it’s true!
Ever wonder why?
Well, it’s because due to the enormous risk of injury. Safety comes first.
Now listen to me carefully:
Not just 9 or 14-inch grinder, just like any other metalworking equipment, an angle grinder is powerful yet dangerous if it’s not treated with the respect and care that they command.
So before getting back to work with the grinder, know these angle grinder safety precautions to stay safe.
Why the Angle Grinders cause so many injuries?
If it is not handled properly, the grinder is able to give some nasty injuries. This is a sharp metal disk rotating at so much speed, often between 9,000- 11,000 RPM. So the grinder in your hand is no joke. It is able to cut through from metals to even diamond which the toughest material is found in the earth. Just imagine what it can do the flesh and bones!
Scary, isn’t it?
Let me tell you some interesting statistics about the people who have sustained most injuries and they fall into two broad groups.
- A newbie who just enter in the industry
- Grinder with the experience of 15 or 20 years
So as you can see, no matter how experienced you are, you going to fall on the accident if you are not cautioned enough.
5 Angle Grinder Safety Tips you should know before It’s Too Late: Angle Grinder Safety Checklist
Angle grinder demands attention just like your girlfriend!
Yes, you heard that right.
This innocent looking tool may cause some life-threatening injuries. To avoid it, here are some tips for grinder safety:
Handle your angle grinder with caution!
The very first thing, you should keep in mind that an angler grinder is a machine that needs to be respected.
Believe me or not, this powerful tool has a frightening side if you don’t treat it appropriately. A decent amount of sparks is formed while using angle grinders.
Angle grinder accidents! Sound’s alarming, but it’s true.
You need to find a disc that fits your grinder!
You have to use right-sized cutting discs here as often the grinders are not fitted with their standard-sized 356 mm or 14 inches cut-off disc. Not choosing properly fit disc for the grinder can make you vulnerable to any potential injuries.
No doubt about it!
Cutting discs are designed for an utmost outside edge speed of approximately 70 meters/second. Another thing you should know that larger angle grinders are produced with lower revolutions than smaller grinders, therefore, the edge speed of the disc remains around 70 m/s. That’s why angle grinder safety guard is a big fact.
An abrasive wheel is a big deal!
The risk of breakage!
It could be more dreadful than your imagination. So try to keep low the risk low by checking discs regularly, correctly mounting, and carefully using angle grinders.
See the difference?
You can reduce or stop the risk of an explored disc by knowing the suppression of the drive. So you should only think of a disc in good condition and within the speed limitations and the expiry date. However, it will be marked on its wheel and never exceed these.
Trust me; Kickback can cause fatal accidents.
The worst part is when the grinder grabs of jams when cutting, and is to happen if you are applying the wrong wheel, or try to use it at the crazy speed.
So make sure you are holding the right wheel and have set up the right speed. Plus, dull wheels increase the risk of accidents from kickback. Keep in mind that you are trained in mounting wheels. Don’t forget to change the wheels when they become worn.
Stay away from fire!
No matter how cautious you are, when using the grinder, you gonna likely to produce a decent number of sparks. So a safe environment is pretty important for the use of a grinder.
So what am I talking about?
For example, if you are working with an angle grinder in an area near a refueling station, or use of flammable or around explosive substances, unconsciously you are creating a risk of explosion and fire.
If there are somehow any flammable materials in the area, the grinder may catch flash from the flying sparks. The best practice is to use angle grinder safety ppt.